It's time for Screens

Summer is here and perfect time of year to check the condition of your screens.  

If you need to replace your window screens, first visit your local hardware store to determine what type of new screen would be best. Mesh fineness is measured by the strand counts in each direction, per inch. Typical household screens are a mesh of 18" x 14" or finer.

You might also need to pick up a few tools that might be missing from your toolbox. Depending on the method you choose, you'll need a hammer, staple gun, some C-clamps, spline, a screen installation tool (or a putty knife), and scissors (or a utility knife) that can cut your screen from the frame.

Wood and metal frames require different approaches. If you are removing a screen from a wood frame, pry off the molding by starting in the center of a strip and moving toward the ends. Don't break the molding! Additional information on wood replacement windows.

You will also need to stretch the new screen fabric tight first in order to make sure the new screen lasts and performs well. To stretch the screen, buy some 1x2 stock longer than the width of the window, and some 1x4 stock that you can use to saw out wedges. Lay the frame down on a horizontal surface. Cut your new replacement screening a minimum of 1 inch longer and wider than the frame, and center the screen width over the frame.

Staple one end of the screen to the top of the frame, then take one of the 1x2 lengths and affix it firmly to your work surface just beyond the bottom end of the window frame. Stretch the rest of the screen over this 1x2 and nail another 1x2 to it, with the new screen in between.

Take the wedges you've made and place them between the edge of the 1x2 cleats and the bottom of the screen frame. Tap the wedges in to this space until the screen is taut. Now, staple the screen at the bottom of the frame, and then up along the sides, spacing the staples about an inch or two apart. Trim off the excess screen, and use brads to reattach the moldings. Countersink the brads, the fill the holes with wood putty.

Another way to attach the new screen, aside from using wedges, is with clamps and sawhorses. This method works better with larger windows, such as picture windows.

Take a couple of sawhorses and saw some 2x4s the same length as the screen, then lay them end to end across the sawhorses to create a rough frame. (Or lay a sheet of plywood across the sawhorses instead of the 2x4s.) Lay the stripped frame across the boards, and use C- clamps to hold the screen tight in the middle.

Lift each end of the frame and insert small 2x4 blocks. The objective here is to bow the ends of the frame upward, although this needs to be done gently so that you don't accidentally snap the frame.

Staple the screen in place, starting at the C-clamps in the center. When you're done, remove the 2x4 blocks at the ends, and the screen will be very taut! Replace the screen moldings, and you're ready to go.

3rd Avenue Window Supply is your #1 source for window repair and replacement! They have the background and experience to make sure your home only continues to become mroe beautiful! Choose 3rd Avenue Window Supply for all your window replacement and repair!

A great way to update your home is with new windows, there are so many types of windows.  Updated windows can make a nondescript home into one that shines with curb appeal. But you need to know what is available and what it’s called when talking to your window professional. Here are some terms you should know:

1. Fixed – This type of window cannot be opened. It is usually inexpensive and suitable for higher windows that won’t be opened anyway.


2. Double hung – One of the most common windows and a great window for a period home. The window consists of two sashes that move up and down. Only half of the window can be open at one time.


3. Casement – Another common window, casement windows are hinged vertically to swing in and out like a door and operated with a crank.


4. Awning – Awning windows are similar to casement windows but are hinged horizontally.


5. Jalousie – Jalousie windows are horizontally placed narrow strips of glass, lowered by crank. Out of favor today, they were very popular in the mid-century.


6. Sliding – Sliding windows move on top and bottom tracks. They are very common and can be inexpensive.


7. Paladian – A paladian window consists of group of three windows with an arch over the center. These windows have become very popular in the last decade. They provide visual interest and drama to a home.


8. Picture – Picture windows are especially popular in ranch-style homes. They are large fixed windows flanked b y 2 casements or double-hung windows.


9. Clerestory – Clerestory windows were especially popular in Craftsman homes. They consist of a strip of small horizontal panes set high on a wall.


10. Elliptical or Arched – Elliptical or arched windows often placed above double hung or fixed windows in today’s new homes.

Now you are ready to change to look of your home.  To determine what will look best in your home, contact 3rd Avenue Window Supply and they can help you determine what will look best.